hi friends, i am new in drone world. I bought usage
Mini 2. I make few flights with max distance 50m. Last flight i try higher distance about 300m above sea (good visual connection done and rc). And i had problem with lost connection few times at difference distance 80m, 150m 200m. I read about this problem after update fw 01.07.0200 on internet and i found this thread. i tried fcc app on
mini 2. Firmware and fly app version:
Patch is completed succesfully.
Before patch
After patch
I think this is ok, and dron now in fcc mode? Am i right?
I have one question.
In the first time, i didn't see well line position and i think patch didn't do anything because i read here patch don't work on FW 01.07.0200.
After that i downgrade FW with Assistent 2 to 01.06.0200 (RC FW and Fly app version was not downgraded, they remained the same like on the first picture) and i try patch again and patch also work
Now i have a dilemma and my question is what is better:
Should i leave FW version 01.06.0200 or update to 01.07.0200? Which is better and much stabile?
I am little confused because i don't know does patch really work on FW 01.07.0200 or just change connection line position? I can't test because how i tell before i fly just few times.
Also i see one bug on version 01.06.0200.
Mini 2 distant 30 cm from RC on photo, but in fly app distance is 2 meters.
All this scares me, because im new in this and i fly above sea. I am afrai that potential error with this settings might cause the drone to crash into the sea. And this is game over for me.
I hope someone who have experince give me a good advice ASAP. THANKS.
Sorry for my bad english and i wish you good and safe flights.